The new ELM327 is suitable for Mini V2.1 Bluetooth OBD dual-mode automatic judgment 5.1 Bluetooth car fault detection

Description

 

Certification: CE
Origin: Mainland China
Item Type: Code Readers & Scan Tools

ELM327 Automotive diagnostic instrument installation and use instructions
This product supports the OBD-Ⅱ protocol models produced after 1996 (including VPW, PWM, ISO, KWP 2000, CAN protocol). You can connect the product to a laptop or desktop computer that reads trouble codes and knows what they mean, cleans the car’s trouble code, displays the sensor’s data stream (speed, water temperature, etc.)… It’s very powerful!

Product features:
This product supports all OBD-Ⅱ protocol, USB interface output, more convenient to connect to the laptop.
Output interface: USB
LED indicator: OBD transmit/receive, RS232 transmit/receive, power supply
Operating voltage: 12V, (with short circuit/overvoltage protection function)

Product functions:

Read and know the trouble code meaning, clear the car’s trouble code, display sensor data (including: engine speed, coolant temperature, vehicle speed, intake manifold pressure, intake temperature, air flow rate, throttle position, oxygen sensor voltage, fuel pressure, etc.) and much more advanced features…

Graphical interface software commonly used :Scantool, Scanmaster, Proscan, PcmSCAN, Digimoto, can also use the super terminal with the AT command to use.

Installation instructions:

1. Car information reading software ScanTool(dot)net:

2. USB driver:

Installation procedure:

1. Download ScanTool(dot)net software.

2. Connect the OBD-Ⅱ cable to the ODB-Ⅱ interface of the car.

3. Connect the OBD-ⅱ cable to the MINI OBD II. If the power indicator is on and the ODB TX/RX indicator blinks, the connection is normal.

4. Connect the MINI OBD II to the computer with the USB cable. At this time, the computer will prompt you to discover the new hardware. Follow the computer prompts to install the USB driver in the CD-ROM or downloaded from the Internet. Go to the “Device Manager” of your computer and click the Port. You will find the newly installed hardware “USB Serial Port”. Write down the COM number on the right. (This COM number will be used in the next step of software setup)

5. Start ScanTool(dot)net software. Open ScanTool(dot)netv1.13 for windows, select the options TAB, select the COM number you wrote down in the previous step, and OK. With the software installed, you can diagnose your vehicle.